Iron-on knit interfacing - medium weight - Black

The stabilizer is backed with a heat-activated dry adhesive film that is three times stronger than other traditional iron-on stabilizers without adding extra weight and stiffness. Knit interfacing adds soft, flexible support to all knits and woven fabrics. The knit stretches in all directions to provide slight support and maximum drape to fabrics if it supports. With a short ironing time at low temperature, it allows a greater choice of materials to be bonded. No steam or steaming needed, and it won't lift or wrinkle after washing.

To glue: apply the iron-on interfacing with the shiny side against the interior side of the fabric. Cover with a light fabric such as cotton or a sheet of parchment or silicone press paper. Press with iron at high temperature, without steam and without movement for 10 to 15 seconds. Lift the iron and move to glue the rest of the project.

100% polyester, iron-on on one side

Width = 59 inches / 150 cm.

Sold by the half meter

Sample: Receive a small, clearly identified square (approximately 4cm x 4cm, subject to availability)